CLI Switch: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
6vffdh (Diskussion | Beiträge) |
6vffdh (Diskussion | Beiträge) |
||
| (22 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt) | |||
| Zeile 1: | Zeile 1: | ||
| + | |||
| + | == Instan On == | ||
| + | |||
| + | :[https://www.youtube.com/watch?v=7ONO1G2Hf0M Instant ON] | ||
== HP 2920 == | == HP 2920 == | ||
: [https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04028664 HP 2920 Switch Series - Minimal Configuration Through the Console Port Connection] | : [https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04028664 HP 2920 Switch Series - Minimal Configuration Through the Console Port Connection] | ||
| + | : [https://community.spiceworks.com/how_to/85991-hp-procurve-cli-cheat-sheet Cheat Sheet] | ||
| + | : [https://znil.net/index.php/HP_ProCurve_Switche_Uplinks_Nachbar_Switche_anzeigen_mit_Port_und_Namen Nachbar Switche] | ||
| + | |||
| + | : Aruba JL321A 2930M-48G Stacking Switch | ||
| + | : Aruba Stacking Module JL325A | ||
| + | : Aruba 10 G SFP+ Module J9150D | ||
| + | : Aruba JL355A 2540-48G-4SFP+ Switch | ||
| + | |||
| + | : Anschließen über COM Port USB Micro Kabel an die Console. | ||
| + | |||
| + | == Befehle == | ||
| + | Setup und Show Befehle: | ||
| + | |||
| + | # setup | ||
| + | # config | ||
| + | # show vlan | ||
| + | # show vlans ? | ||
| + | # show config | ||
| + | # show trunk | ||
| + | # show trunks ? | ||
| + | # ip routing | ||
| + | # show ip | ||
| + | # show lacp | ||
| + | # show interafaces | ||
| + | # show config <span style="color:#d9d7d7> :: Show config file</span> | ||
| + | # show running-config <span style="color:#d9d7d7> :: Show running config file</span> | ||
| + | # sh ru <span style="color:#d9d7d7> :: Show running config file</span> | ||
| + | # show cdp neighbor-info | ||
| + | # show cdp neighbors detail <span style="color:#d9d7d7> :: Switche Uplinks Nachbar Switche</span> | ||
| + | # show mac-address | ||
| − | |||
| + | show interface 51 | ||
| − | + | SWITCH1# show vlan ports 20-24 detail | |
| + | SWITCH1# show vlan ports 3 detail | ||
| + | SWITCH1# show vlan ports trk2 detail | ||
| + | SWITCH1# show vlan ports all detail | ||
| + | |||
| + | "Config" Befehle: | ||
| + | |||
| + | SWITCH1# config | ||
| − | + | VLANs anlegen | |
| + | SWITCH1(config)# vlan 10 name zSERVER | ||
| + | SWITCH1(config)# vlan 20 name zCLIENT | ||
| + | SWITCH1(config)# vlan 30 name zWLANAP | ||
| + | SWITCH1(config)# wr mem | ||
| − | config | + | Trunk-Port erstellen an einzelnen Port |
| + | SWITCH1(config)# vlan 1 untagged 48 | ||
| + | SWITCH1(config)# vlan 10 tagged 48 | ||
| + | SWITCH1(config)# vlan 20, 30 tagged 48 | ||
| + | SWITCH1(config)# wr mem | ||
| − | + | Trunk-Port mit LACP erstellen an eine Port Gruppe und Zuweisung von Vlans: | |
| + | Aruba-Stack-2930M(config)# trunk 2/47,3/47 trk6 lacp | ||
| + | Aruba-Stack-2930M(config)# interface trk6 | ||
| + | Aruba-Stack-2930M(eth-Trk6)# untagged vlan 1 | ||
| + | Aruba-Stack-2930M(eth-Trk6)# tagged vlan 10,20,30,40,50 | ||
| + | Aruba-Stack-2930M(eth-Trk6)# wr mem | ||
| − | + | SWITCH1(config)# vlan 20, 30 tagged 48 | |
| + | SWITCH1(config)# wr mem | ||
| − | + | Trunk-Port löschen | |
| + | no trunk 1/A1, 1/A2 | ||
| + | wr mem | ||
| − | + | Access-Ports erstellen | |
| + | SWITCH1(config)# vlan 10 untagged 1-10 | ||
| + | SWITCH1(config)# vlan 20 untagged 11-20 | ||
| + | SWITCH1(config)# vlan 20 untagged 21-30 | ||
| + | SWITCH1(config)# wr mem | ||
| − | " | + | Vlan von dem port löschen |
| + | no vlan 3 untagged 37 | ||
| + | no vlan 4 tagged 37 | ||
| + | |||
| + | Andere Variante "config" interface oder Gruppe: | ||
| − | vlan | + | SWITCH1(config)# interface 31-40 |
| + | SWITCH1(eth-31-40)# untagged vlan 10 | ||
| + | SWITCH1(eth-31-40)# tagged vlan 20 | ||
| + | SWITCH1(eth-31-40)# tagged vlan 30 | ||
| + | SWITCH1(eth-31-40)# wr mem | ||
| + | SWITCH1(eth-31-40)# exit | ||
| + | SWITCH1(config)# | ||
| − | + | VLAN vom Port entfernen | |
| − | vlan 1 | + | SWITCH1(config)#interface 1 |
| + | SWITCH1(eth-1)# no untagged vlan 10 | ||
| + | 1:These ports are moved to default VLAN. | ||
| − | + | : Test Befehle | |
| − | + | ping 192.168.10.100 | |
| − | + | == Stacking Switch Aruba Befehle == | |
| − | + | stacking enable | |
| + | show flash | ||
| + | show version | ||
| + | boot system flash primary | ||
| + | boot system flash secondary | ||
| + | boot set-default flash secondary | ||
| + | show configuration pending | ||
| + | configuration purge-pending-config | ||
Aktuelle Version vom 28. März 2023, 15:45 Uhr
Inhaltsverzeichnis
Instan On
HP 2920
- HP 2920 Switch Series - Minimal Configuration Through the Console Port Connection
- Cheat Sheet
- Nachbar Switche
- Aruba JL321A 2930M-48G Stacking Switch
- Aruba Stacking Module JL325A
- Aruba 10 G SFP+ Module J9150D
- Aruba JL355A 2540-48G-4SFP+ Switch
- Anschließen über COM Port USB Micro Kabel an die Console.
Befehle
Setup und Show Befehle:
# setup
# config # show vlan # show vlans ? # show config # show trunk # show trunks ? # ip routing # show ip # show lacp # show interafaces # show config :: Show config file # show running-config :: Show running config file # sh ru :: Show running config file # show cdp neighbor-info # show cdp neighbors detail :: Switche Uplinks Nachbar Switche # show mac-address
show interface 51
SWITCH1# show vlan ports 20-24 detail SWITCH1# show vlan ports 3 detail SWITCH1# show vlan ports trk2 detail SWITCH1# show vlan ports all detail
"Config" Befehle:
SWITCH1# config
VLANs anlegen
SWITCH1(config)# vlan 10 name zSERVER SWITCH1(config)# vlan 20 name zCLIENT SWITCH1(config)# vlan 30 name zWLANAP SWITCH1(config)# wr mem
Trunk-Port erstellen an einzelnen Port
SWITCH1(config)# vlan 1 untagged 48 SWITCH1(config)# vlan 10 tagged 48 SWITCH1(config)# vlan 20, 30 tagged 48 SWITCH1(config)# wr mem
Trunk-Port mit LACP erstellen an eine Port Gruppe und Zuweisung von Vlans:
Aruba-Stack-2930M(config)# trunk 2/47,3/47 trk6 lacp Aruba-Stack-2930M(config)# interface trk6 Aruba-Stack-2930M(eth-Trk6)# untagged vlan 1 Aruba-Stack-2930M(eth-Trk6)# tagged vlan 10,20,30,40,50 Aruba-Stack-2930M(eth-Trk6)# wr mem
SWITCH1(config)# vlan 20, 30 tagged 48 SWITCH1(config)# wr mem
Trunk-Port löschen
no trunk 1/A1, 1/A2 wr mem
Access-Ports erstellen
SWITCH1(config)# vlan 10 untagged 1-10 SWITCH1(config)# vlan 20 untagged 11-20 SWITCH1(config)# vlan 20 untagged 21-30 SWITCH1(config)# wr mem
Vlan von dem port löschen
no vlan 3 untagged 37 no vlan 4 tagged 37
Andere Variante "config" interface oder Gruppe:
SWITCH1(config)# interface 31-40 SWITCH1(eth-31-40)# untagged vlan 10 SWITCH1(eth-31-40)# tagged vlan 20 SWITCH1(eth-31-40)# tagged vlan 30 SWITCH1(eth-31-40)# wr mem SWITCH1(eth-31-40)# exit SWITCH1(config)#
VLAN vom Port entfernen
SWITCH1(config)#interface 1 SWITCH1(eth-1)# no untagged vlan 10 1:These ports are moved to default VLAN.
- Test Befehle
ping 192.168.10.100
Stacking Switch Aruba Befehle
stacking enable show flash show version boot system flash primary boot system flash secondary boot set-default flash secondary show configuration pending configuration purge-pending-config
